|Name:||Bus Led Display||Pixed Pitch:||5.625mm|
|LED Type:||SMD2727||Display Size:||1620*360mm|
|Ave.Power（≤W/ Set）:||150w||Cabinet Weight:||11KG/PCS|
150w bus led screen,
patented bus led screen,
150w bus led display
Patented Design P5.625 Bus LED Screen Smart Media Platform
3U View Screen is a new mobile media platform that could display advertising and news coverage. Same commercial material can be released and played simultaneously on various platforms; vice versa, different commercial materials on different platforms. It can satisfy both large-scale and individuation. 3U View vehicle LED screen let your advertising go through every block of the city!
1. With GPS modules, the car can be tracked and located.
2. 3U View Bus LED Screen is anti-vibration, totally high temperature and moisture-proof. Which is also featuring electrostatic prevention and light protection to make it more durable for the long-term usage.
3. The rear space of the bus is big enough to offer a display area for advertising. So that the Bus LED Screen made according to the size of bus rear window can have better display effect.
4. It support 4G and WiFi, which has advertising release system and cluster control. Meanwhile, GPS, secondary development are introduced as well.
|Pixel Pitch||5.625mm||Cabinet Material||Iron|
|Display Size||1620*360mm||Cabinet Color||Black|
|Module Size||360*180mm||Cabinet Weight||11KG/PCS|
|Screen Resolution||288*64||Viewing Angle||120°/120°|
|Module Resolution||64*32||Refresh Rate||1920Hz|
|Cabinet Size||1625*375*60||Brightness||4500 cd/m2|
|Max. Power (≤W/ set)||500W||Driving Method||1/8|
|Ave. Power (≤W/ set)||150W||Supported Formats||JPG,GIF ,BMP, WMF,MP4|
|Input Voltage||24V||Screen lifespan||＞100000 hours|
|Output Voltage||5V||Environmental Requirements||
Temperature: - 40℃ ~ + 80 ℃
Humidity: 10% ~ 95% RH
Q: Can I have a sample order for Bus LED Screen?
A: Yes, we welcome sample order to test and check quality. One set sample is acceptable.
Q: How to proceed an order for Bus LED Screen?
A: 1. Let us know your requirements or application and your bus rear window parameters.
2. We quote according to your requirements or our suggestions.
3. Confirms the samples and places deposit for formal order.
4. We arrange the production.
Q: What is your delivery time?
A: We will deliver in 3-25 work days.
Bus LED Screen is fixed at the rear window position of the bus, the bus factory embedded iron plate under the mounting bracket. When install the screen, first fix the bracket. Then use the side hexagon screws to fix the Bus LED Screen. Fix the antenna nearby to make sure it can receive the signal.
1. Bus LED Screen is installed in the rear of the bus, the base must be fixed by 4 self-tapping screws.
2. LED Screen and the rear window should keep the distance of a palm. If the screen is too close to the glass, The screws fixing the screen bracket may become aging and loose. In this situation, vehicle shake may break the window. The screen should be installed in the center of the rear space of the bus.
3. The installation effect is shown in the figure. The power cord can outlet either from left side or right side of the cabinet.
Schematic diagram of wiring assembly
After installation, check the routing, power supply, and the bus condition to make sure if it can work normally. Open the power switch and ACC switch and check if the screen can be brightened normally. You should check the following two points. First, check whether the rear window and the whole area in the bus is clean. Secondly, check whether there are iron dust and saw dust left by drilling holes in the engine. Record the ID number on the screen and the corresponding vehicle number. When everything is done, close the vehicle power supply and the bus door.
Bus LED Screen Case
Contact Person: Martin